Which of these isn't a thing?

Which of these isn't a thing?

• D2D2T
• LTO-5
• D2T
• LOT2 

EXPLANATION

 Disk-to-disk-to-tape (D2D2T) is a data storage and backup technique where data is backed up on a disk before it is copied to a backup tape device. This databackup process temporarily first stores the primary disk content to another diskand then to the backup tape device.

Linear Tape-Open (LTO) is a magnetic tape data storage technology originally developed in the late 1990s as an open standards alternative to the proprietary magnetic tape formats that were available at the time. ... LTO is widely used with small and large computer systems, especially for backup.

Dist to tape (D2T) is a backup methodology in which data is backed up directly from a disk (typically a hard disk) to a magnetic tape. This process is widely applied in enterprises where the archival stability is critical, allowing a disaster recovery plan to recover data

Read More

What's the main difference between Category 5 and Category 5e cable?

What's the main difference between Category 5 and Category 5e cable?

• Improved crosstalk protection
• More fire resistant
• Faster throughput
• Nothing, it's just a certification 

EXPLANATION

[Q] What's the difference between CAT 5 cable and CAT 5e cable?
[A] CAT 5 cable and CAT 5e cable have several differences, the most important are as follows:

• Network support - CAT 5 cable will support 10/100 Ethernet. That is, Ethernet and Fast Ethernet. CAT 5e cable will support Ethernet, Fast Ethernet, and Gigabit Ethernet. CAT 5e Cable is completely backwards compatible, and can be used in any application in which you would normally use CAT 5 cable.
• Less cross talk - Cross talk is the electrical interference that results when one wire's signal effects another wire's signal. CAT 5e cable has been improved over CAT 5 cable in this respect, and cross talk has been greatly reduced.
• Bandwidth - This is directly related to network support, in the sense that the bandwidth is the information-carrying capacity of a system. The greater the bandwidth, the greater the information-carrying capacity in a given period of time. CAT 5e cable is rated at 350 megahertz, and it is this increased bandwidth (compared to CAT 5 cable) that allows it to support Gigabit Ethernet.

If you are unsure whether to order CAT 5 OR CAT 5e, we recommend ordering CAT 5e. CAT 5e is completely backwards compatible and we do not charge any additional amount for it. The improvements made in CAT 5e over the original CAT 5 Cable are astonishing, so it will always be the right choice between the two.
CAT 5 Cable will still be sufficient for many applications. In fact, there are still companies operating today that have special requirements for CAT 5. These will be the exceptions of course, because almost all new installations are being done with CAT 5e. The improved signal carrying capacity of the cable is the primary reason.
CAT 5e Cable also has improved durability, due to improvements in the quality and thickness of the PVC protective jacket. It is more than suitable for most data cabling requirements.
Keywords: CAT 5, CAT 5e

 

Read More

What cable category do you need for 10 Gigabit Ethernet?

What cable category do you need for 10 Gigabit Ethernet?

• Cat 5e
• Cat 5
• Cat 6a
• Cat 3 

EXPLANATION

Category	Shielding	Max Transmission Speed (at 100 meters)	Max Bandwidth
Cat 3	Unshielded	10 Mbps	16 MHz
Cat 5	Unshielded	10/100 Mbps	100 MHz
Cat 5e	Unshielded	1,000 Mbps / 1 Gbps	100 MHz
Cat 6	Shielded or Unshielded	1,000 Mbps / 1 Gbps	250 MHz
Cat 6a	Shielded	10,000 Mbps / 10 Gbps	500 MHz
Cat 7	Shielded	10,000 Mbps / 10 Gbps	600 MHz
Cat 7a	Shielded	10,000 Mbps/10 Gbps	1,000Mhz

Read More

Which of the following cable types is most susceptible to electromagnetic interference?

Which of the following cable types is most susceptible to electromagnetic interference?

• Fiber optic
• STP
• Coaxial
• UTP 

EXPLANATION

UTP cable is susceptible to EMI.
Incorrect Answers:
B: RG-8 coaxial cable is also susceptible to EMI, but not to the same extent as UTP.
C: Fiber optic cable is immune to EMI.References:David Groth and Dan Newland, A+ Complete
Study Guide (2nd Edition), Sybex, Alameda CA, 2002, pp. 325,327.David Groth and Toby
Skandier, Network+ Study Guide (4th Edition), Sybex, Alameda CA, 2005, pp. 19-20, 25-27.
D: Fiber optic cable is immune to EMI.References:David Groth and Dan Newland, A+ Complete
Study Guide (2nd Edition), Sybex, Alameda CA, 2002, pp. 325,327.David Groth and Toby
Skandier, Network+ Study Guide (4th Edition), Sybex, Alameda CA, 2005, pp. 19-20, 25-27.

Read More

What type of cable would you use to establish a connection between a PC and a switch?

What type of cable would you use to establish a connection between a PC and a switch?

• Passover
• Straight-through
• Rollover
• Crossover 

EXPLANATION

 

Straight Through vs Crossover Cable, which to choose?
Straight through vs crossover cable, which one should I choose? Usually, straight through cables are primarily used for connecting unlike devices. And crossover cables are use for connecting alike devices.
Use straight through Ethernet cable for the following cabling:

• Switch to router
• Switch to PC or server
• Hub to PC or server

Use crossover cables for the following cabling:

• Switch to switch
• Switch to hub
• Hub to hub
• Router to router
• Router Ethernet port to PC NIC
• PC to PC

 

Read More

What type of cable would you use for a PC to console connection?

What type of cable would you use for a PC to console connection?

• Crossover
• Rollover
• RedRover
• Straight-through 

 

 

EXPLANATION

 

Rollover cable (also known as a Yost cable or a Console cable) is a type of null-modem cable that is often used to connect a computer terminal to a router's console port. This cable is typically flat (and has a light blue color) to help distinguish it from other types of network cabling.

Rollover cable (also known as Cisco console cable) is a type of cable that is most commonly used to connect a computer terminal to a router's console port. So it is said tht when u connect Pc to a console port of router -> Cross over cable is used. It same in the case of rollover cable which is used to connect Pc to a console port of router..

Read More

What type of cable would you use to connect one PC to another PC?

What type of cable would you use to connect one PC to another PC?

• Crossover
• Rollover
• Ribbon
• Straight-through 

EXPLANATION

 

Choose a Straight-Through or Crossover Cable?

Usually, straight-through cables are primarily used for connecting unlike devices. And crossover cables are use for connecting unlike devices alike devices.
Use straight-through cable for the following cabling:

• Switch to router
• Switch to PC or server
• Hub to PC or server

Use crossover cables for the following cabling:

• Switch to switch
• Switch to hub
• Hub to hub
• Router to router
• Router Ethernet port to PC NIC
• PC to PC

 

Read More